Beijing Starpoint

 Home /Products/Beijing Star Point

About Beijing Starpoint Technology Company Limited.

Since founded in January 2001, Beijing StarPoint Technology Co., Ltd. has always focused on researching and innovating in new technology and products of wireless communications. StarPoint supplies high quality measurement equipment in mobile communication and broadband wireless access terminals among 2G, 3G and 4G, which ensures the quality of our clients' products.

StarPoint has a lot of patents and Computer Software Copyrights. StarPoint is the China's leading R&D and manufacturer of communications test set, terminal RRM conformance test system, protocol analyzer, universal software defined radio platform and etc... In 3G, our company developed the world-first communications test set that supports the TD-SCDMA formats which finally completed the TD-SCDMA industry chain in China. Besides, our products cover most of the major technology formats in terminal testing - GSM, GPRS, EDGE, WCDMA, LTE, WLAN,CMMB and etc... StarPoint use the ISO9001 quality management system to ensure that we are providing the most reliable products and solutions to our clients.



Beijing Starpoint Products

SP8011 Communications Factory Test Set

Most advanced cable tester up to 2,500 MHz

Introduction

Description

SP8011 is a Communication Factory Test Set with the own IPR of Beijing StarPoint Technology Company Limited. This test set can perform TD-LTE�FDD-LTE RF test; TD-SCDMA RF test; WCDMA RF test;CDMA2000 1x RF test;CDMA2000 1xEV-DO RF test; GSM RF test; GPRS/EDGD RF test and CMMB test. SP8011 also has calibration function and RF test in Non Signaling test mode.

SP8011 support parallel testing of the dual-RF port, two terminals can be tested simultaneously.

SP8011 is applicable to extensive fields, such as terminal manufacture and maintenance of TD-LTE, FDD-LTE, TD-SCDMA, WCDMA,CDMA2000 1x,CDMA2000 1xEV-DO,GSM, GPRS/EDGE and CMMB.

Function

SP8011 can provide a complete test function such as TD-LTE, FDD-LTE, TD-SCDMA,WCDMA,CDMA2000 1x,CDMA2000 1xEV-DO,GSM, GPRS/EDGE, and CMMB:

TD-LTE Test Function

SP8011 can function as TD-LTE system simulator, TD-LTE signal generator and TD-LTE terminal signal analyzer. It supports TD-LTE RF test, and the measurements cover the testing item set by 3GPP TS 36.521-1.

FDD-LTE Test Function

SP8011 can function as FDD-LTE system simulator, FDD -LTE signal generator and FDD -LTE terminal signal analyzer. It supports FDD -LTE RF test, and the measurements cover the testing item set by 3GPP TS 36.521-1.

TD-SCDMA Test Function

SP8011 can function as TD-SCDMA system simulator, TD-SCDMA signal generator and TD-SCDMA terminal signal analyzer. It supports TD-SCDMA RF test, and the measurements cover the testing item set by 3GPP TS34.122.

WCDMA Test Function

SP8011 can function as WCDMA system simulator, WCDMA signal generator and WCDMA terminal signal analyzer. It supports WCDMA RF test, and the measurements cover the testing item set by 3GPP TS34.121.

CDMA2000 1x /CDMA2000 1xEV-DO Test Functon

SP8011 can function as WCDMA system simulator,WCDMA signal generator and WCDMA terminal sigal generator and CDMA2000 1x /CDMA2000 1x EV-DO signal analyzer. It supports CDMA2000 1x / CDMA2000 1x EV-DO RF test,and measurement cover the testing item set by 3GPP2 C.S0011 and 3GPP2 C.S.0033A.

GSM/GPRS/EDGE Test Function

SP8011 GSM/GPRS/EDGE terminal test function supports frequency range stipulated by GSM900,DCS1800,PCS1900,GSM850 and so on ,and also supports handover between frequency range and frequency points. According to the requirements of 3GPP TS 51.010 v7.10.0/3GPP TS 51.010 v8.0.0 of GSMGPRS/EDGE, SP8011 can accomplish basic RF index test of GSMGPRS/EDGE terminal.

CMMB Test Function

Main services of mobile multimedia broadcast terminal includes television broadcast, voice broadcast, electrical service guide, emergency broadcast and data broadcast and so on According to standard part 1-7 of "Mobile multimedia broadcast ",SP8011 supports CMMB terminal service test.

Detailed Information

SP8011 basic technical index
Transmitter RF Index
CW output frequency range 400 MHz ~ 2800 MHz
Frequency resolution 1 Hz
CW output power range 400M~2100M -120 dBm ~ -5 dBm (RF IN / OUT port)
2100M~2800M -120dBm ~ -10dBm (RF IN / OUT port)
400M~2100M -120 dBm ~ 0 dBm (RF OUT port)
2100M~2800M -120dBm ~ -5dBm (RF OUT port)
Output power resolution 0.01 dB
CW output power tolerance 700M ~2800M
≥-90 dBm ±0.5dB
-90 dBm ~-120 dBm ±0.5dB
400M~700M
≥-90 dBm ±0.5dB
-90 dBm ~-120 dBm ±0.8dB
Transmitter phase noise Offset 1MHz -90 dBc/Hz
Offset 10MHz -140 dBc/Hz
VSWR(voltage standing wave ratio) IN/OUT port<1.20
OUT port<1.30
Output resistance 50 Ω
Output interface type N Female
Receiver RF Index
CW maximum safe input level +35dBm
CW input frequency range 400 MHz ~ 2800 MHz
Frequency resolution 1 Hz
CW input power range -65 dBm ~ +35dBm
Input power resolution 0.01 dB
Receiver noise floor < -140 dBm/Hz
CW input power test tolerance < ±0.5 dB
CW frequency deviation test range ±15 kHz
Input resistance 50 Ω
Input interface type N Female
Time base index
Temperature stability ≤ 0.01 ppm
maximum frequency deviation < ±1 * 10^-8 (0 ~ 40 ℃)
aging rate ≤ 0.1 ppm/year
Time Clock Reference Input
input frequency requirement 10 M±5 Hz
input voltage requirement 2V~4V Vpp sine/TTL
input resistance 50 Ω
input interface type BNC Female
Instrument Working Condition
instrument working temperature +5 ~ +40 ℃
instrument working humidity 20% ~ 80%
instrument storage temperature -20 ℃ ~ +70 ℃
instrument storage humidity 5% ~ 93%
preheat time for boot 30 minutes
Instruments Dimension
height 240 mm
width 550 mm
depth 600 mm

Options

SP8011 Configuration Guide
Selection of Hardware Module
Description Remark
System Basic Platform Terminal tester hardware platforms, including the controller, RF module, Base band Simulation Module etc,Support parallel testing of the dual-RF port.
Selection of test software
Description Remark
TD-LTE System Test Software V1.0 Supply TD-LTE system simulation function, support terminal registration, paging, build signaling connection, etc; support a abundant set of protocol parameters to modify; Supply the RF measurements cover the testing item set by 3GPP TS36.521-1,also has calibration function
FDD LTE System Test Software V1.0 Supply FDD-LTE system simulation function, support terminal registration, paging, build signaling connection, etc; support a abundant set of protocol parameters to modify; Supply the RF measurements cover the testing item set by 3GPP TS36.521-1,also has calibration function
TD-SCDMA System Simulation Software V1.0 Supply TD-SCDMA system simulation function, support terminal registration, paging, build signaling connection, etc; support a abundant set of protocol parameters to modify
TD-SCDMA Signal Analyzing Software V1.0 Supply the RF measurements cover the testing item set by 3GPP TS34.122,also has calibration function
CMMB Test Software V1.0 Supply CMMB broadcast signal transmission and meet the needs of CMMB terminal production test
TD-SCDMA Non-signaling Basic Test Software V1.0 Supply TD-SCDMA RF list function, support TD-SCDMA terminal Fast Calibration
WCDMA System Simulate Software V1.0 Supply WCDMA system simulation function, support terminal registration, paging, build signaling connection, etc; support a abundant set of protocol parameters to modify
WCDMA Non-signaling Signal Analyzing Software V1.0 Supply WCDMA RF list function
WCDMA Fast Calibration Software V1.0 Supply WCDMA terminal Fast Calibration
GSM/EDGE system simulation software V1.0 Supply GSM/EDGE system simulation function, support terminal registration, paging, build signaling connection, etc; support a abundant set of protocol parameters to modify
GSM/EDGE signal analyzing software V1.0 Supply the RF measurements cover the testing item set by 3GPP TS 51.010 v7.10.0/3GPP TS 51.010 v8.0.0,also has calibration function
GSM/EDGE non-signaling based testing software V1.0 Supply GSM RF list function, support GSM terminal FDT(Fast Device Tune)
CDMA2000 1x non-signaling based testing software V1.0 Supply CDMA2000 1x non-signaling test functon
CDMA2000 1xEV-DO non-signaling based test software V1.0 Supply CDMA2000 1xEV-DO non-signaling test function

Documents

Brochure

Datasheets